hardware

warning: Creating default object from empty value in /data/web/1/000/027/003/273448/htdocs/panticz.de/modules/taxonomy/taxonomy.pages.inc on line 33.

APC Back-UPS ES 700G under Ubuntu

# install
apt-get install -y apcupsd

# configure
sed -i 's|UPSCABLE smart|UPSCABLE usb|g' /etc/apcupsd/apcupsd.conf
sed -i 's|UPSTYPE apcsmart|UPSTYPE usb|g' /etc/apcupsd/apcupsd.conf
sed -i 's|DEVICE /dev/ttyS0|DEVICE|g' /etc/apcupsd/apcupsd.conf
sed -i 's|ISCONFIGURED=no|ISCONFIGURED=yes|g' /etc/default/apcupsd

# start apcupsd demon
/etc/init.d/apcupsd start

# get status
apcaccess status

# configure
/etc/init.d/apcupsd stop
apctest

# monitor
tail -f /var/log/apcupsd.events

# OPTIONAL: configure /etc/apcupsd/apccontrol

# LINKS

Kyocera FS-1010

Download PPD files for kyocera printer
wget http://cdn.kyostatics.net/dlc/de/driver/all/linux_ppd_s_ksl_8.-downloadcenteritem-Single-File.downloadcenteritem.tmp/Linux_PPDs_KSL8_4.zip -P /tmp/
unzip /tmp/Linux_PPDs_KSL8_4.zip -d /tmp

# create new printer
lpadmin -p Kyocera_FS1010 -v socket://192.168.1.11:9100 -E -P "/tmp/PPD's_KSL_8.4/German/Kyocera_Mita_FS-1010_de.ppd"
#-o PageSize=A4

system-config-printer

install
#wget http://dl.dropbox.com/u/4170695/www/Kyocera-FS-1010.ppd -P /tmp

Terratec Cinergy T USB XXS

# install firmware für dvbt (/lib/firmware/dvb-usb-dib0700-1.20.fw)
sudo apt-get install linux-firmware
sudo apt-get install kaffeine
sudo apt-get install libxine1-plugins libxine1-all-plugins

# Links
http://kuparinen.org/martti/comp/ubuntu/en/terratecxxs.html
http://forum.xbmc.org/showthread.php?t=51945&highlight=dvb-t

Technisat TS35 IR Remote

wget http://lirc.sourceforge.net/remotes/technisat/100TS035 -O /etc/lirc/lircd.conf
mv /etc/lirc/lircd.conf /etc/lirc/lircd.conf.org

lircd --nodaemon --device="name=Formosa21 USB IR Receiver" --driver=dev/input /etc/lirc/lircd.conf

http://mythwiki.de/index.php?title=Technisat_Skystar2_mit_USB_IR-Empf%C3%A4nger
http://wiki.ubuntu-forum.de/index.php/Lirc

Kernel options

from Documentation/kernel-parameters.txt

vga=xxx
set your framebuffer resolution to VESA mode xxx. (http://en.wikipedia.org/wiki/VESA_BIOS_Extensions#Linux_video_mode_numbers)

acpi=off OR noacpi
This parameter disables the whole ACPI system. This may prove very useful, for example, if your computer does not support ACPI or if you think the ACPI implementation might cause some problems (for instance random reboots or system lockups)

acpi=force

SheevaPlug HDD susped with hdparm (Hard drive sleep mode)

sudo apt-get install -y hdparm
 
cat <<EOF>> /etc/hdparm.conf
/dev/sda {
   spindown_time = 240
}
EOF

TechnoTrend Connect S2-3600 (USB DVB-S2 sat reciver) with Ubuntu 9.10

### DRIVER BROKEN??? (MY) RECIVER DONT GET ANY SIGNAL...

SIPDefault.cnf

# Firmware update
#image_version: P0S3-07-1-00
 
# Proxy Server - entweder als IP oder als FQDN
# kann fuer jede Konfigurierte Line angegeben werden
# ansonsten wird bei mehr als einer konfigurierten Line
# proxy1_address als default genommen
proxy1_address: "030.sip.arcor.de"
proxy2_address: ""
proxy3_address: ""
proxy4_address: ""
proxy5_address: ""
proxy6_address: ""
 
# Proxy Server Port (default - 5060)
proxy1_port: 5060
proxy2_port: 5060
proxy3_port: 5060
proxy4_port: 5060
proxy5_port: 5060
proxy6_port: 5060
 
# Proxy Registrierung (0-nein (default), 1-ja)
proxy_regis
Syndicate content