Sonoff Mini flash ESPhome

Configuration

esphome:
  name: mini-r2
  friendly_name: Sonoff Mini R2

esp8266:
  board: esp01_1m        # Mini R2 = ESP8285, 1 MB flash

logger:
  baud_rate: 0

wifi:
  ssid: !secret wifi_ssid_2
  password: !secret wifi_password_2
  # manual_ip:
  #   static_ip: ${device_ip}
  #   gateway: 192.168.x.x
  #   subnet: 255.255.255.0
  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "ESPHOME"
    password: "12345678"

api:
  reboot_timeout: 15min
  # encryption:
  #   key: !secret api_encryption_key

ota:
  platform: esphome
  # password: !secret ota_password

# the web_server & sensor components can be removed without affecting core functionaility.

web_server:
  port: 80

sensor:
  - platform: wifi_signal
    name: ${device_name} Wifi Signal Strength
    update_interval: 60s
  - platform: uptime
    name: ${device_name} Uptime

#######################################
# Device specific Config Begins Below #
#######################################

binary_sensor:
  - platform: gpio
    pin: GPIO00
    id: reset
    internal: true
    filters:
      - invert:
      - delayed_off: 10ms
    on_press:
      - switch.toggle:
          id: relay_1

  - platform: gpio
    name: ${device_name}_status
    pin: GPIO04
    id: switch_1
    on_press:
      then:
        - switch.toggle:
            id: relay_1
    on_release:
      then:
        - switch.toggle:
            id: relay_1

switch:
  - platform: gpio
    name: ${device_name}_switch
    icon: "mdi:lightbulb_outline"
    pin: GPIO12
    id: relay_1
    restore_mode: restore_default_off

status_led:
  pin:
    number: GPIO13
    allow_other_uses: true
    inverted: true

output:
  - platform: esp8266_pwm
    id: blue_led
    pin:
      number: GPIO13
      allow_other_uses: true
    inverted: True

light:
  # the 4 lines below define the Blue LED light on Sonoff Mini, to expose in HomeAssistant remove line "internal: true"
  - platform: monochromatic
    name: ${device_name}_blueled
    output: blue_led
    internal: true # hides the Blue LED from HomeAssistant

Configuration

source esphome/bin/activate
esphome run sonoff_mini_r2.yaml --device 192.168.178.51

Links
https://community.home-assistant.io/t/flash-sonoff-minir2-firmware-3-6-0-with-esphome-over-the-air/311042
https://community.home-assistant.io/t/flash-sonoff-minir2-firmware-3-6-0-with-esphome-over-the-air/311042
https://devices.esphome.io/devices/sonoff-mini-relay/

Sonoff BASIC R1 with ESPhome

ESPhome configuration (sonoff_bassic_r1.yaml)

esphome:
  name: sonoff-basic-r1

esp8266:
  board: esp01_1m

wifi:
  networks:
    - ssid: !secret wifi_ssid
      password: !secret wifi_password
    - ssid: !secret wifi_ssid_2
      password: !secret wifi_password_2

  ap:
    ssid: "Sonoff Basic Fallback"
    password: "12345678"

logger:
  baud_rate: 0

api:

ota:
  platform: esphome

web_server:
  port: 80
  local: true
  log: false

output:
  - platform: gpio
    pin:
      number: GPIO13
      inverted: true
    id: sonoff_led

light:
  - platform: binary
    id: relay_led
    internal: true
    output: sonoff_led

switch:
  - platform: gpio
    pin: GPIO12
    id: sonoff_relay
    name: "Sonoff Relay"

    on_turn_on:
      - light.turn_on: relay_led

    on_turn_off:
      - light.turn_off: relay_led

binary_sensor:
  - platform: gpio
    pin:
      number: GPIO0
      mode: INPUT_PULLUP
      inverted: true

    id: sonoff_button
    name: "Sonoff Button"

    on_press:
      - switch.toggle: sonoff_relay

ESPhome flash

uv venv esphome
source esphome/bin/activate
uv pip install tornado esptool esphome

source esphome/bin/activate
esphome run sonoff_bassic_r1.yaml --device 192.168.178.xxx

Links
https://devices.esphome.io/devices/sonoff-basic-diy-light/

esphome