HP ProLiant Server

#curl -s https://downloads.linux.hpe.com/SDR/hpePublicKey2048_key1.pub | sudo  apt-key add -
wget -q https://downloads.linux.hpe.com/SDR/hpePublicKey2048_key1.pub -O-| sudo  apt-key add
 
#sudo add-apt-repository -y 'deb [arch=amd64,i386] http://downloads.linux.hpe.com/SDR/repo/mcp bionic/current non-free'
echo "deb http://downloads.linux.hpe.com/SDR/repo/mcp bionic/current non-free" | sudo tee /etc/apt/sources.list.d/hp-nonfree.list
 
apt update
 
# sudo apt-get install amsd
sudo apt-get install -y hponcfg 

cat <<EOF> pass.xml
<RIBCL VERSION="2.0">
  <LOGIN USER_LOGIN="x" PASSWORD="x">
  <USER_INFO MODE="write">
    <MOD_USER USER_LOGIN="Administrator">
      <PASSWORD value="pa$$word"/>
    </MOD_USER>
  </USER_INFO>
  </LOGIN>
</RIBCL>
EOF
 
sudo hponcfg -f pass.xml
<code>
 
<strong>Format NAND</strong>
<code>
cat <<EOF> ResetNAND.xml 
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="Administrator" PASSWORD="xxxxx">
<RIB_INFO MODE="write">
<FORCE_FORMAT VALUE="all" />
</RIB_INFO>
</LOGIN>
</RIBCL>
EOF
 
hponcfg -f ResetNAND.xml 

cat <<EOF> /tmp/update_firmware.xml
<RIBCL VERSION="2.0">
    <LOGIN USER_LOGIN="${BMC_USER}" PASSWORD="${BMC_PASS}">
        <RIB_INFO MODE="write">
            <UPDATE_RIB_FIRMWARE IMAGE_LOCATION="http://${ARCHIVE_HOST}/ilo4_270.bin" />
        </RIB_INFO>
    </LOGIN>
</RIBCL>
EOF

sudo ntpdate -u ntp.ubuntu.com 
 
# install ssacli
apt install -y gpg-agent
wget http://downloads.linux.hpe.com/SDR/hpePublicKey2048_key1.pub -qO-| apt-key add -
https://downloads.linux.hpe.com/SDR/keys.html
#echo "deb http://downloads.linux.hpe.com/SDR/repo/mcp bionic/current non-free" > /etc/apt/sources.list.d/hp.list
echo "deb http://downloads.linux.hpe.com/SDR/repo/mcp jessie/current non-free" > /etc/apt/sources.list.d/hp.list
apt update
apt install -y ssacli
 
# or
wget https://downloads.linux.hpe.com/SDR/repo/mcp/pool/non-free/ssacli-6.30-8.0_amd64.deb
dpkg -i ssacli-*_amd64.deb
 
 
# show physical devices
ssacli ctrl slot=0 pd all show status
 
# show logical devices
ssacli ctrl slot=0 ld all show status
 
# enable HBA mode (if supported, remove logical devices first)
ssacli controller slot=0 modify hbamode=on forced
 
ssacli controller slot=0 show config detail
 
# clear previous raid
ssacli controller slot=0 modify clearconfigdata
ssacli ctrl slot=0 pd all show detail
 
ssacli controller rescan
 
ssacli ctrl slot=0 ld 1 show
ssacli ctrl slot=0 ld 1 delete
 
# create raid0
ssacli ctrl slot=0 create type=ld drives=1I:1:1 raid=0
 
# create raid1
ssacli ctrl slot=0 create type=ld drives=1I:2:1,1I:2:2 raid=1
 
# boot volume
ssacli controller slot=0 ld 1 modify bootvolume=primary

Off - Not Configured
Solid Green - Configured
Blinking Green - Rebuilding
Blinking Green\Amber - Configured & Predictive Failure
Blinking Amber - Predictive Failure
Solid Amber - Failed

- name: Add HPE repository
  apt_repository:
    repo: deb http://downloads.linux.hpe.com/SDR/repo/mcp {{ ansible_distribution_release|lower }}/current non-free
    update_cache: yes

F10
Scripting Toolkit Windows PE 64 Bit Mode
 
hpssacli ctrl all show config 
hpssacli ctrl slot=0 ld 0 show
hpssacli ctrl slot=0 ld 0 delete
hpssacli controller slot=2 modify hbamode=on forced

# Enable IPMI remote access
Administration > IPMI/DCMI over LAN Access > "IPMI/DCMI over LAN Access"